[flow-tools] flow-recieve routers

[Mark Fullmer]

flow-capture will log a message via syslog indicating exporters it is
servicing.  eg

Apr  3 23:34:00 nf1 flow-capture[193]: New exporter: time=1017894840 src_ip=10.1.1.1 dst_ip=10.1.1.2 d_version=5

When the stat inverval is configured [-S stat_interval] you will also get 
log messages ever stat_interval minutes with per exporter counters.

Apr  3 23:35:00 nf1 flow-capture[193]: STAT: now=1017894900 src_ip=10.0.0.1 dst_ip=192.148.244.31 d_ver=5 pkts=1093 flows=32790 lost=0 reset=0

mark

On Mon, Apr 08, 2002 at 01:35:43PM -0600, Dave Packham wrote:
> Is there any way to use flow-tools to see which routers are sending
> packets to flow-capture?  I need to make sure that all sending routers
> are in my flowscan file to build graphs.
> 
>  
> 
> THanks
> 
>  
> 
> Dave Packham 
> 
> University of Utah Netcom 
> 
> Manager Network Engineering, 
> 
> Advanced Projects 
> 
> ISO Office member 
> 
> DSO
> 
>  
> 
> c. 712-0364@801
> 
> w. 585.6043@801 
> 
> Dave.Packham@Utah.edu
> 
> 
> Trillian/ICQ#:45818442
> Current Trillian status:  
> 
>  <mailto:45818442@pager.icq.com> 45818442@pager.icq.com
> 
> SMS: (Send an SMS message to my ICQ): +278314245818442
> More ways to contact me:  <http://wwp.icq.com/45818442>
> http://wwp.icq.com/45818442
>  
> 
>  <http://www.netcom.utah.edu/network/engineering.html>
> http://www.netcom.utah.edu/network/engineering.html
> 
>  <http://www.map.utah.edu/umaplink/0893.html>
> http://www.map.utah.edu/umaplink/0893.html
> 
>  
> 
>  
>