[Retros] Programs for Solving Retro Problems

[Renny Bosch]

Hi Mario,

Thank you for your help. I set compatibility to Windows 95 but it didn't
help.  Also tried Windows 98, again without success. And you are right, I am 
using Windows XP.  If you can think of anything else for me to try, I would 
appreciate it.

Renny


----- Original Message ----- 
From: "Mario Richter" <mri_two at t-online.de>
To: "The Retrograde Analysis Mailing List" <retros at janko.at>
Sent: Sunday, August 24, 2008 1:41 AM
Subject: Re: [Retros] Programs for Solving Retro Problems



> Renny> ... but the control panel (Pieces, Color, etc.) overlaps the right

> Renny> edge of the Board by about 1/3  of a square.

> Renny> ...

> Renny> On a hunch I reconfigured my screen to display 1024 x 768 pixels

> Renny> (my normal is 1280 x 1024), and that solved the problem.

>

> I'm using it with a display resolution of 1280 x 1024 pixels

> a very long time, and I never had the problem you described -

> so the reason for your difficulties must be something else.

>

> If my assumption is correct that you are using WindowsXP as

> your OS, than you might try to set the compatibility options

> for the "Retractor" program correctly.

>