[W126 Coupe] 1- doesn't start in cold 2 - oil pressure strange

[Jim]

Talbir
         Thanks for your quick reply, if I find that other connector I'll
remove the short loom and replace it.
But I'll give your second suggestion a try first.
   James
----- Original Message -----
From: "Sharan Bains" <sharanbains at hotmail.com>
To: <mbcoupes at mbcoupes.com>
Sent: Tuesday, January 25, 2005 5:27 AM
Subject: Re: [W126 Coupe] 1- doesn't start in cold 2 - oil pressure strange


> Hi James,
>
> Not sure on the part no for the connector, but if you give MB delaership
> parts a call with your chassis number and they should be able to pull up
the
> diagram of the oil sender arrangement. It should only cost a couple of
> dollars.
>
> The loom going from sender to dash usually has a second two pin connector
> plug in-line, where it runs up near the wiper motor to the fusebox. Check
> that the conenctions are intact at that plug too.
>
>
> Talbir
>
> >From: "Jim" <snow at snowy.net.au>
> >Reply-To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>
> >To: "Mercedes Coupes Mailing Lists" <mbcoupes at mbcoupes.com>
> >Subject: Re: [W126 Coupe] 1- doesn't start in cold 2 - oil pressure
strange
> >Date: Mon, 24 Jan 2005 17:18:08 +1100
> >
MB Coupes, L.L.C.